| The WSM/WSS system consists of a main module (WSM) which interfaces directly with the safety input of the main
door controller. The main module in turn can monitor up to 4 sub-controllers (WSS). Each sub-controller is powered by 1-4 batteries, and can
monitor 2 safety edges, or 1 safety edge and 1 door-in-door sensor. The system is
completed with our new PB11 low power consumption photoelectric sensors for
safety edges. Power for the PB11 is supplied by the sub-controller. The system will
also work with many safety edge products already on the market. Some additional features of the new WSM/WSS include:
 |
2.4 GHz duplex
communication |
|
16 selectable
(via dipswitch) channels |
|
Low battery
signal output relay |
|
LED indication
for power, output detection, low battery, and channel synchronization |
|
25 Hz operating
frequency |
|
Test input for
safety check |
|
Built-in antenna |
|
10m range
between main controller and sub-controller |
The main controller (WSM) operates on 12-24 VAC/DC, and each sub-controller (WSS) will work with 3rd party safety edges and mechanical switches.
The WSM/WSS is ideal for new construction installations as part
of a complete safety system, or as an enhancement to existing installations.
The controllers and sub-controllers are
fully synchronized and multiplexed, operating on 16 different channels, so no crosstalk
interference can occur amongst individual sensors. The system meets all relevant global
standards, and complies with all FCC and Canada IC regulations, with cUL and CE approvals
for assurance of high quality and safety. The new Wireless Safety System is available from Carlo Gavazzi’s North American network of sales
offices / distributors or www.GavazziOnline.com. |
