|
|
Upper Management Visit from CARLO GAVAZZI Automation SpA |
|
|
 |
|
On June 30th, Valeria Gavazzi, representing the majority shareholder Gavazzi family, and Vittorio Rossi, the
newly appointed CEO of the Automation Components Business Unit, visited CARLO GAVAZZI's office in Buffalo Grove, Illinois.
|
| Pictured
above: Vittorio Rossi, Valeria Gavazzi, and Fred Shirzadi |
|
|
|
Eastec |
|
|
 |
|
CARLO GAVAZZI exhibited at the Eastec trade show in mid-May, which was held at the Eastern States Exposition Grounds in West Springfield, MA
|
| Pictured
above: Vince White and Bill Ralph |
|
|
|
International Garage Door Expo |
|
|
 |
|
In late April, Carlo Gavazzi exhibited at the IDA's International Garage Door Expo in Nashville, Tennessee.
It was the premier trade show for the garage door industry. On display were our light curtains, radar sensors,
our vast range of photoelectric sensors, inductive loop detectors, anemometers, and motor control solutions,
including pushbutton/pilot devices, contactors, drives and soft starts.
|
| Pictured
above: Ken Wagner and Jon Bach |
|
|
|
AM Expo / ATX South Show |
|
|
 |
|
In mid-March, CARLO GAVAZZI exhibited at the AM Expo/ATX South Show which was held in Charlotte, North Carolina. AM Expo / ATX South is an automation technology show which is run in conjunction with SouthPack, Plant Engineering South, Green Manufacturing Expo, Design & Manufacturing South, Plastec South, PTX South, Powder & Bulk Solids Expo South and Metaltec trade shows.
|
| Pictured
above: Charlie Ayers |
|
|
|
ATX West |
|
|
 |
|
CARLO GAVAZZI recently exhibited at the ATX West Show, which was held in Anaheim, California in mid-February. ATX is an automation technology show which is run in conjuction with WestPack, Electronics West, Pacific Design and Manufacturing, Medical Design and Manufacturing, PTX West and Green Manufacturing Shows.
|
| Pictured
above: Wayne Shaffer and Ray Bani |
|
|
|
Pack Expo '08 |
|
|
 |
|
CARLO GAVAZZI exhibited at Pack Expo, North America's premier packaging exhibition, which was held at Chicago's McCormick Place from November 9th-13th.
Products showcased included the comprehensive range of solid state relays, proximity, photoelectric and ultrasonic sensors, variable frequency drives, safety products, contactors/overloads, current/voltage/phase monitoring modules and digital panel meters. |
| Pictured
above: Wayne Shaffer, Rafal Pabich and Jim Dunn |
|
|
|
ISA Expo '08 |
|
|
 |
|
Carlo Gavazzi exhibited at the ISA Expo, which was held at the Reliant Center in Houston, Texas in mid-October. It is one of the Gulf states’ most popular and well attended process and automation trade shows. |
| Pictured
above: Ray Bani and Scott Ezell |
|
|
|
National Manufacturing Week |
|
|
 |
|
Carlo Gavazzi recently exhibited at the Assembly Technology Expo as part of the National Manufacturing Week Show, which was held at the Donald E. Stephens Convention Center in Rosemont, Illinois in late September. It is one of this nation’s premier electrical, electronic, and motion automation shows. |
| Pictured
above: Wayne Shaffer, Marge Chesters and Shawn Petitpren |
|
|
|
NAEC's Elevator World Expo |
|
|
 |
|
In mid-September, Carlo Gavazzi exhibited at the NAEC's Elevator World Expo - a showcase for the North American elevator industry, which took place outside of Dallas, Texas. On display was our new elevator light curtain, as well as our broad range of three phase monitoring controls, sensors, limit switches, contactors, soft starts, drives, timers and relays.
|
| Pictured
above: Ken Wagner and Raffaella Sirena |
|
|
|
Intersolar |
|
|
 |
|
CARLO GAVAZZI exhibited at the INTERSOLAR Show in mid July, which was held in San Francisco's Moscone Center. INTERSOLAR is one of the premier shows worldwide for solar energy, and this was the inaugural show in North America.
|
| Pictured
above: Ken Wagner and Anjan Somadder |
|
|
|
ISA Mexico 2008 |
|
|
 |
|
In early June, CARLO GAVAZZI showcased our vast array of automation products at ISA Mexico 2008, Mexico’s most important automation, process and instrumentation trade show.
|
| Pictured
above: Jon Bach and Wayne Shaffer |
|
|
|
ATX East |
|
|
 |
|
CARLO GAVAZZI exhibited at ATX East in early June. ATX is an automation technology show run in conjunction with EastPack, Plastec East, Medical Design and Manufacturing and the Atlantic Design and Manufacturing Shows. |
| Pictured
above: Vince White |
|
|
|
Car Care 2008 |
|
|
 |
|
The Car Care Show was held at the Orange County Convention Center in Orlando, FL from April 8 - 10. It is the premier trade show for the Car Wash and Detailing industry. |
| Pictured
above: Wayne Shaffer |
|
|
|
NAFEM Show |
|
|
 |
|
In mid-October Carlo Gavazzi exhibited at the National Association of Food Equipment Manufacturers (NAFEM) Show Manufacturing Week Show, which was held at the World Congress Center in Atlanta, Georgia. It is the annual event for commercial food equipment manufacturers. |
| Pictured
above: Ken Wagner and Paul Margrave |
|
|
|
2007 North
American Sales Meeting |
|
|
| Carlo Gavazzi held their annual North American Sales Meeting earlier this year outside of Chicago. It was a racing theme: Kickin’ it into Overdrive! |
|
|
 |
| Many of the products discussed at the meeting have either been launched, or will be launched in the coming months, and will certainly assist in kicking sales into overdrive as we transition into 2008. |
|
Pack Expo |
|
|
 Pictured above: Jim Dunn, Jon Bach, Wayne Shaffer and Rafal Pabich |
|
CARLO GAVAZZI exhibited at Pack Expo, North America's premier packaging exhibition, which was held at Chicago's McCormick Place from Oct. 29th through Nov. 2nd. Products showcased included the comprehensive range of solid state relays, proximity, photoelectric, ultrasonic and color sensors, variable frequency drives, safety products, contactors/overloads, current/voltage/phase monitoring modules, digital panel meters and enclosures.
|
|
NPE 2006 |
|
|
 Pictured above: (Left to right) : Jon Bach, Jim Dunn, Fred Shirzadi, Wayne Shaffer, Rafal Pabich, Brian Sciberras, Sean Conboy, Bill Hamilton and Joel Audino |
|
CARLO GAVAZZI exhibited at NPE 2006, the plastic machinery industry's premier trade show, which takes place place every three years at Chicago’s McCormick Place from June 19th through 23rd.
|
|
