Digital Panel Meters
The UDM series is a hi-tech modular panel meter family developed to meet your most advanced application needs. The series is available with either a 3 1/2 digit (UDM35), 4 digit (UDM40), or 6 digit (UDM60) display. It can also be ordered without a display and be used as transducer or signal conditioner (USC).
The UDM series accepts most signal inputs (current, voltage, temperature, tach) and offers an analogue output as well as up to 4 digital outputs (relay). Since these are modular meters, outputs can be added at any time in the field. Remote monitoring via a PLC or PC is possible by inserting an RS485 communication module into the meter. In this way many meters can be monitored without adding a lot of expensive analogue cards to your PLC.
The UDM40 meter also features a 3-colour display allowing at a glance indication of relative operating condition (OK - Green, Caution - Yellow, or Alarm - Red). Furthermore, the UDM40 is also able to handle and correctly display non-linear signals. The UDM60 series is for displaying pulse type signals (frequency, RPM, period measurement, and counters). The dual inputs and dual LCD display allow simultaneous display (digital and analogue) of both inputs.
Product RangeCGHMI Series
HMI touch displays in 4.3, 7, 10, and 15 inch sizes.
UDM 35 Series
Modular 3 ½ Digit Digital Panel Meters in 48mm x 96mm housing.
UDM 40 Series
Modular 4 Digit Digital Panel Meters in 48mm x 96mm housing.
6 Digit Digital Panel Meters for tachometer, rate, and frequency applications.
Modular signal conditioner.
3 Digit Digital Panel Meter in 72mm x 72mm housing.
AC Current or Voltage Datasheet
3, 3 ½, and 4 Digit Digital Panel Meters in 48mm x 96mm housing.
3 digit AC Current or Voltage Meter Datasheet
3 ½ Digit AC/DC Current/Voltage Meter/Controller Datasheet
4 Digit AC/DC Current/Voltage Meter/Controller Datasheet
Current Transformers and Shunts.
Up to 300 Amps
Up to 600 Amps
Up to 1200 Amps
Up to 1600 Amps
DC Current Shunts
|© 2015 Carlo Gavazzi|